Black Friday deals from Friday 29th November-Sunday 1st December - on full kits, kits with panel sets and kits with pre made bodies only. Discount applied at checkout.

 

Basic Kit Unihog

Toylander Unihog

Based on the Mercedes 1948 Unimog®, this rugged model easily accommodates adults and older kids.

Choose our basic kit option and you’ve got everything you need to construct your own Toylander Unihog (excluding wood and paint). This is left hand drive only.  Please see below for Time Saving Extras and Optional Upgrades.

This manageable twin motor build project should take you around 85 hours.  You can add time saving upgrades such as Ready Made Body or Pre Cut Panel Set.

Basic kit includes manual, steel fabrication set, chunky tyres, drive kit (twin motor and battery), speed control kit, bodywork and additional components (lights, electric horn, wheel caps, dash and dashboard stickers).

Contents of basic kit may differ from stock image and between vehicles. You will receive the items listed above.

SKU
KIT-UNI

Full kit contains

Fabricated Parts: Steel

  • Front Axle + Pivot Support Angles
  • Steering and stub axles
  • Steering column
  • Rear axle
  • Brake assembly complete with brake materials *Right or Left hand drive Please state if LHD required
  • Front bumper
  • Rear bumper
  • Above items include all Nyloc nuts, Washers, Bolts, Screws, Brass washers, 1” washers, Spring, Split pins etc.

Wheels

  • Set of 4 Road wheels with chunky tread tyres
  • Conversion to two wheels for drive sprocket extension and bearing

Drive

  • 2 Electric motors and gearboxes
  • 2 Motor Mounting Plates and bolt sets
  • 2 Motor drive sprockets
  • 2 Chain and link sets
  • Steering wheel Steel, three spoke Black finish

Control

  • Speed control:12/24v including ignition key, fwd/rev switch & motor wiring. Gives genuine throttle feel and variable response.
  • Aluminium chequerplate throttle box complete ready assembled.
  • Safety Isolator switch with red removable key
  • Motor protection fuse box and spare fuse

Bodywork

  • Spare wheel moulding
  • Hub caps, plastic moulded set of 4 red caps, glue on
  • Windscreen Kit (You assemble)
  • Chain guard (2 Piece)
  • Fuel tank/water tank cap x 2
  • Ancillary parts pk: Rr bumper ends, seat hinges, Bonnet lock, seat stops, 2 moulded door hinges, 2 moulded side vents

Components

  • Lighting set: H/lamps x 2, tail light x 2, switches, wire, con blocks, crimps All LED lamps, headlight support nuts&bolts
  • Lighting and horn fuse box
  • Electric horn kit
  • Dash board aluminium plate with hole cut for key switch & F/R switch
  • Instrument sticker
  • Wheel retaining caps. Do not fit until job complete.( Use jubilee clips as temporary fixing).

Batteries

  • 2 x GEL battery 33amp Hr 12v (safe non spill)
  • Safe battery mounting set, strap and bolts for 1 or 2 batteries
Write Your Own Review
You're reviewing:Basic Kit Unihog
Your Rating

Get inspired

Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover